RAC-960PEF-V/PMF-V PoE
- On-board lithium battery ensures data storage can reach up to 1 year upon power outage.
- Bell key design. Suit for various location.
- Standalone operation & setting function
- Support swipe card and swipe card with pin codes enter modes.
- The memory of the standard model is 40,000 cardholders (max) and 100,000 events.
- Casing tamper proof detection and door tampers alarm.
Features
- On-board lithium battery ensures data storage can reach up to 1 year upon power outage.
- Bell key design. Suit for various location.
- Standalone operation & setting function
- Support swipe card and swipe card with pin codes enter modes.
- The memory of the standard model is 40,000 cardholders (max) and 100,000 events.
- Casing tamper proof detection and door tampers alarm.
- Slim, stylish design with waterproof sensitive touch keypad with blue backlight.
- Provide 128 time zones and time schedules, 8 time conditional unlock door schedules. (per week)
- Built-in RS-485 and TCP / IP communication interface to PC.
- Supports PoE (Power Over Ethernet); The controller can be powered directly through the network cable without any external power supply.
- Display name on the LCD screen after swiped card.
- Memory buffer full warning. When memory capacity reaches 90%, it will make a warning sound to alert the system administrator for data collection.
- Blacklist and Duress card/code setting. When door opened in the emergency, the controller will send signal to control center at the same time for tracing and rescue.
- Programmable disarm code and able set maximum attempts to trigger re-swipe card alarm. The controller time-out function will avoid intrusion in and has self security.
- Provide 32 working shifts and 32 siren output. LCD will display current shift and activate alarm. Provide 100 holiday schedules per year.
- Able to connect external slave reader and support Anti-Passback to every single door.
- Conforms to ISO 14443A standard; supporting Mifare card; Unique ID or Block read format supported. (RAC-960PMF-V)
- The standard model can access 950 users with 2 fingerprint templates per each user (total 1,900 fingerprint templates ).
- Quick and accurate fingerprint verification, supports 1:1 authentication & 1:N identification. And audible voice prompts guiding users during verification process.
Specification
|
Model No. |
RAC-960PEF-V |
RAC-960PMF-V |
|
CPU Processor |
32 Bit (Supports ISP) | |
|
Read Format |
EM (125KHz) |
Mifare (13.56MHz ) |
|
Read Range |
6~8 cm |
3-5 cm |
|
Slave Reader |
T2 or Wiegand (1 Set ) | |
|
Input Port |
3 Sensors (Door Sensor x 1、Exit Button x 1、Case Sensor x 1); | |
|
Output Ports |
Relay x 1；O.C. Output x 2 (Door Lock / Alarm or Siren, | |
|
Cardholders |
40,000 (max) | |
|
Events |
100,000 | |
|
Fingerprint Capacity |
950 user capacity. ( 2 fingerprint templates per person) | |
|
Identification Mode |
1：1 / 1：N | |
|
Identification Time |
1：1 <= 1 sec. 1：1,000 <= 1 sec. | |
|
FAR |
<=0.001% | |
|
FRR |
<=0.01% | |
|
Fingerprint Sensor |
Optical CMOS Sensor | |
|
LED Indicator |
Red/Green Bi-Color LED x 2 (Power/Comm./Status) | |
|
LCD Display |
128 x 64 Dot. Graphic Display with Backlight | |
|
Keypad |
17 Key (F1-F4, 0-9, ＊, ＃, Bell) (Sensitive Touch Keypad) | |
|
Real Time Clock |
YES | |
|
Beep Tone |
Buzzer & Operating steps sound | |
|
ID or IP Setting |
Command setting by keypad | |
|
Memory Battery |
3V Lithium Battery (Replaceable) | |
|
Power Input |
DC 12V/800mA; PoE | |
|
Current Consumption |
800mA (max.) | |
|
Comm. Interface |
To PC: RS-485, TCP/IP | |
|
Comm. Baudrate |
RS-485 : 9,600 / 19,200 bps-N-8-1 。 TCP/IP : 10/100Mbps | |
|
Operating Temp. |
0° C ~ 55° C / 32° F ~ 131° F | |
|
Relative Humidity |
20% ~ 80%(Non-condensing) | |
|
Dimension(mm) |
140 (L) x 130 (W) x 41 (H) | |
