PXR-Q1MSL

  • Conforms to ISO 14443A, supporting MIFARE card.
  • Unique ID or Block read format supported and programmable key value.
  • Supports 7 bytes serial card number.
  • Provides RS-485 communication interface for long distance installation.
  • Supports to scan a QR Code from your smart phone or paper.
  • Support QR Code scanning function to replace RFID cards sensing

Features

  • Conforms to ISO 14443A, supporting MIFARE card.
  • Unique ID or Block read format supported and programmable key value.
  • Supports 7 bytes serial card number.
  • Provides RS-485 communication interface for long distance installation.
  • Supports to scan a QR Code from your smart phone or paper.
  • Support QR Code scanning function to replace RFID cards sensing
  • Provides 500 valid card numbers (32 cards are reserved that can be downloaded from AP to the reader) work as standalone operation mode while the emergency.
  • Auto-learning function. The valid card ID can be added or deleted through the AP.
  • Reader mode : a standard operation mode while connects with control panel; Control panels poll readers through communication protocol.
  • Standalone mode : Automatically turning into standalone mode after disconnecting from the control panel for 10 seconds (settable 1~255 seconds).
  • Equipped with DIP-SW, able to set NODE ID, which can be connected to max. of 30 readers.
  • Provides inputs for door sensor, case sensor and exit button.
  • Door ajar alarm, settable the alerting sound made from reader buzzer or external alarm.
  • Reader's LED & Buzzer control can be set by upstream control panel.
  • Wide range of operating temperature to meet the requirements of tropical or frigid zone climate environment.
  • Case sensor detection function to enhance the system security.
  • Watchdog function secures system free from halting.

Specification

Model No.

PXR-Q1MSL

Read Format

Mifare (13.56 MHz )

Read Range

3 cm above

QR Code Scan

Auto scan : Get close to scan automatically
Supports to scan a QR Code from your smart phone or paper
Scan Distance : 5 CM above

Comm. Interface

RS-485

Input Port

Case Sensor x 1, Door Sensor x 1, Exit Sensor x 1

Output Port

Relay x 1, O.C. Output x 2 (Alarm, external ACU-30)

ID Setting

6 Digit DIP-SW

Comm. Baudrate

19,200 bps-N-8-1

LED Indicator

Red/Green Bi-color LED x 1 (Status/Power)

Beep Tone

Buzzer

Power Input

DC 12V

Current Consumption

300mA (max)

Operating Temp.

-20°C~ 70°C / -4°F~ 158°F

Relative Humidity

20% ~ 80%(Non-condensing)

Dimensions (mm)

Faceplate:86(L) x 86(W) x 14(H) Backside box :65(L) x 58(W) x 24(H)

Related Products

Downloads

Type
Name
Format
Downloads
Brochure
PXR-Q1MSL QR Code Reader
PDF
Cart

Login

Login Success